Menu Access & Navigation
Search / Connect / Pairing Vehicles
Menu Access & Navigation
To access the user interface, the menu and to be able to navigate through them, you need, on controller, one of the following:
- A USB keyboard.
The keyboard is detected at runtime and is plug and play (you can add/remove it at any time).
The menu can be accessed and navigated using [Enter/Backspace/ESC/Arrow] keys; - A rotary encoder;
- 4 push buttons (coresponding to Menu/Back/Up/Down), connected as is explaned in Hardware Buttons section;
On vehicles you don't need any of those as there is no user interface on the vehicles. All the vehicles configuration is done through the controller user interface.